RE: [DML] Thermostat Cover leak ... Thoughts please ...

["John Hervey" <john@xxxxxxxxxxxxxxxx>]

Nick, A small amount of silicone wouldn't hurt around the gasket and in the
grove where the o ring sits.
John Hervey



-----Original Message-----
From: Nick Kemp [mailto:nkemp@xxxxxxxx]
Sent: Friday, September 24, 2004 8:17 PM
To: dmcnews@xxxxxxxxxxxxxxx; MN DMC
Subject: [DML] Thermostat Cover leak ... Thoughts please ...


I found the leak (Trying to be optimistic that there is only one).  It is
leaking between the thermostat cover and base.  The gasket is installed
first and then the thermostat in the correct orientation.  The thermostat
and gasket/ring was replaced a couple years ago and the gasket appears OK.
The gasket sits a little loose in the hole and has done so since day 1.

Before I button this up, are there any thoughts.

Thanks,

Nick




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/