[DML] Re: 3rd Brake Light Wiring

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

No matter which way you route the wires install a fuse at the point
you tap off for the 3rd light. If the wire should get pinched and
shorts to ground it will take out the fuse and not ALL of your brake
lights!
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Richard" <dmc_driver@xxxx> wrote:
> --- In dmcnews@xxxxxxxxxxxxxxx, kayoong@xxxx wrote:
> > Mike: 
> > 
> > The easiest way is to splice it into the brake light wire that is on
> the 
> > passenger's side and then run it along the side of the passenger's
> side rear panel 
> > and under the rubber.   (The rubber strip that dampens the rear
> louver that 
> 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
    dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/