[DML] Re: clutch

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

It depends on how acrobatic and flexible you are. The car needs to be
up on jackstands at least and removing the engine cover is a big help.
It is accessed from above AND below especially if you are replacing
the plastic line. It can be done alone but you will need some help to
bleed it. You do not remove the transmission to replace the slave
cylinder.
David Teitelbaum
vin 10757



--- In dmcnews@xxxxxxxxxxxxxxx, "foxmul2001" <foxmul@xxxx> wrote:
> I guess my question in regarding the replacing of the slave cylinder 
> for the clutch was, how do I replace it?  Do I need a lift?  Can I 
> replace it myself?  Can it be accessed from the top?  Do I need a 
> transmission guy to drop the trans?  Thanks for all your help.
> 
> joseph molino




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/