[DML] Re: Fuel pressure values
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[DML] Re: Fuel pressure values
- From: "cruznmd" <racuti1@xxxxxxxxxxxx>
- Date: Sun, 25 Apr 2004 14:26:21 -0000
May I ask why you say that?
My original post was very long so maybe you skimmed past it:
The CPR is new, -and- I swapped it for a known good one from a fellow
owner. The pressure values shown by the gauge are only a 3 psi over
the high spec. I have verified that it's connected properly from
drawings in the archives.
The frequency vavle buzzes away, and I've check it with a dwell
meter. It is operating within the correct range.
I'm suprised no one has called me out on the 7-14 psi low primary
pressure. My question about that is: Is the pump output low, or is
the primary pressure regulator out of spec?
Can the primary pressure regulator be adjusted?
Rich A.
#5335
--- In dmcnews@xxxxxxxxxxxxxxx, "Harold McElraft" <hmcelraft@xxxx>
wrote:
> I would suspect a malfunctioning or improperly connected pressure
> regulator and/or frequency valve.
>
> Harold McElraft - 3354
>
>
>
> --- In dmcnews@xxxxxxxxxxxxxxx, "cruznmd" <racuti1@xxxx> wrote:
> > My car is experiencing a loss of power. Symptoms are:
> > Flat acceleration curve. With 1/3, to 1/2 pedal applied, car
> > accelerates smoothly but slowly, depress the pedal further and
the
> > engine stumbles mightily and the car bucks. Swapping CPR's with a
> > fellow owner did not correct the problem. RPM relay was checked
> and
> > is operating correctly. All fuel components are new except for
the
> > accumulator. (1.5 years old or less). <snip>
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN