Re: [DML] Unused Wires in Door Harness?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Unused Wires in Door Harness?
- From: "Dave Swingle" <swingle@xxxxxxxxxxx>
- Date: Mon, 19 Apr 2004 02:01:21 -0000
The "extra"wire is on the schematic as Light Green/White. The wire
appears in the harness as part of the bundle that comes from the roof
down the driver side pillar and should appear in a 9-pin connector
somewhere in the compartment near the engine computer. I did not have
time to open up one of the cars and see where it is. You probably
have to remove the carpeted rear wooden panel to get to it. My guess
is that is eventually goes across and connects to the defroster
circuit, so you'll have to make sure you disconnect it from that
before you re-use it.
The problem is going to be that the connection to both doors is tied
together in the harness, in the center of the roof only accessible by
removing the SS T-panel. So the way it is you couldn't use it.
You'll have to get into the roof from above, split the line, remove
the interior roof panel, and then snake a second wire through the
roof into the car (There's a feed through thats covered with black
silicone RTV) without creating a new water leak. Sounds like a lot of
trouble to get the mirrors to blink.
Hope this helps, no guarantees.
Dave
--- In dmcnews@xxxxxxxxxxxxxxx, Steve Stankiewicz
<protodelorean@xxxx> wrote:
> Anybody know off the top of their heads if there are
> any wires in the door harness that weren't used in
> production. (I thought I heard somewhere that there
> were) I'm installing mirrors with the turn signals on
> them and would like to use existing wires if possible
> rather than pulling new ones.
>
> Thanks,
>
> =====
> Steve
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN