[DML] Re: Angle Drive - A new Angle

["content22207" <brobertson@xxxxxxxxxxxx>]

My reply to Bob's post apparently got lost in the ether...

The angle drive nut retaining ring isn't hard to remove. I popped mine
out 3 times as various repairs to the factory unit were attempted
(repair #3 is still going strong BTW). The method:

- Use two 1/8" straight blade screwdrivers, as long as possible
- Use good light (the ring is hard to see)
- Catch a cut end with one screwdriver and pry out of its groove. This
screwdriver remains in place thereafter
- Slide the other screwdriver next to the first, under the ring of course
- Wiggle the second screwdriver around the ring, popping the ring out
of its groove. As soon as you get half way round, it will pop the rest
of the way out on its own

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "joeyoseppi" <joeyoseppi@xxxx> wrote:
> Bob,
> 
> Thanks for the technical "tip" on how to remove the nut on the angle 
> drive.



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/