[DML] Re: Angle Drive Failure

["David Teitelbaum" <jtrealty@xxxxxxxxxxx>]

Bearing grease is not the best lubricant for speedo cables. It causes
a lot of drag. The better choice is "speedometer cable lubricant"
which is just a very light oil with graphite. You should be able to
get a small tube of it in any large auto parts store for a couple of
dollars. Use it sparingly and it will be enough for a long time. You
also need to have the lower cable support bracket. If it is missing or
broken the speedo cable will have an extra bend in it which makes life
harder for the angle drive.
David Teitelbaum
vin 10757


--- In dmcnews@xxxxxxxxxxxxxxx, "Robert Moseley" <videobob@xxxx> wrote:
> I am curious as to who out there has installed one of DMCH's new angle
> drives, and had it fail quickly.
> I am curious as to rather or not it was something other than the 




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/