[DML] Vacuum cap?

["eremhcel" <dmcfive0@xxxxxxx>]

I was getting ready to put my manifold back on tonight when I noticed 
what looks like a vacuum cap sitting in one of the valleys of the 
engine block. It wasn't there on Saturday but it was there tonight. 
It's about an inch long by half-inch in diameter. Where did it come 
from? Could it have been covering the bleed screw for the clutch 
slave cylinder? Does it go somewhere to block off something? I'd hate 
to go and put everything back together and find out that part was 
causing a vacuum leak somewhere. Thanks for any help on this.
Mike
5623




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/