[DML] Re: Angle Drive Nut -- English or Metric?

["content22207" <brobertson@xxxxxxxxxxxx>]

A 1 1/4" does fit well, doesn't it. Makes me wonder if the angle drive
nut truly is 32mm that we're xRef'ing to English, or if in fact it
could be the other way around. Being manufactured in Great Britain, it
would not be unheard of to use a non metric fastener. Girling for
example used English hydraulic fittings, not metric. 

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "David Teitelbaum" <jtrealty@xxxx> wrote:
> I just this afternoon lubricated my angle drive. I usually use a 15"
> adjustable (BIG) wrench but I tried the 1 1/4 open end and it seems to
> fit nicely. I had to loosen the big nut because my angle drive
> wouldn't turn so I took it off and cleaned it up till the nut turned
> on the drive. Now I should be able to turn it to lube it without
> loosening the big nut. > 






To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/