[DML] Broken Bolt advice

["Michael Paine" <mpaine@xxxxxxxxxxxxxxxx>]

Hey all,

Problem: Broken Bolt
Location: Outer Edge, Corner of Passenger Head (near jump lead post).
Condition: Not too bad, Exposed 3/8" of bolt.

<insert all advised ways to extract a broken bolt>

Extended Problem: Broken bit in broken bolt
Condition: VERY bad!

Yes, I was a bonehead in dealing with a broken bolt and have broken a 
bit INSIDE the broken bolt.

I REALLY do not want to remove the head, What can I do? The bolt is 
snapped off about 1/8" below the surface of the head. Using a small 
mirror I can see it is tightened down to within about 1/8" from the end 
of the hole. I would wager there is about 1/4" of material to get 
through. There is no exposed part of the broken bit or the broken bolt. 
I can't drill as the bit is in the way, I can't grind as I have found 
nothing small enough to get in there.

Mayday!

Michael
vin 6067



To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/