Re: [DML] Speedometer Button Question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [DML] Speedometer Button Question
- From: Josh Haldeman <jhaldeman@xxxxxxxx>
- Date: Fri, 05 Mar 2004 00:44:06 -0500
Hi Adam,
0. "Discover" the upside down seating position for the DeLorean, by
sticking your head into the driver's footwell, then maneuvering your
torso around the seat, and sticking your legs up either on the door
sill, or the seat top.
1. Underneath your dashboard, there are six 7mm nylock nuts, four of
which have huge wide washers on them. Remove those (two front, two
back, and two next to the steering column) and the binnacle will fall
forward a bit.
2. Reposition to "standard seating orientation", Lift the binnacle up
and forward far enough to reach in and disconnect the two wiring
harnesses from the back. (hard to see...just pinch the clips on the ends
of the long sides and they should pull out)
3. Release the speedo cable by pushing and sliding the friction ring on
it. (Sometimes it's easier to disconnect the upper cable at the lambda
counter...near the clutch/brake pedals)
4. Binnacle will be free now...turn it over and remove the 8 phillips
head screws holding the instruments to the binnacle.
5. Flip the instruments over, and remove the screws that hold the clear
plastic. This will give you access to the bug.
For the trip odometer reset arm, you most likely will have to replace
the whole speedo...but I have heard of a few instances where the arm
could be repaired. I've got a speedometer for sale...the orange paint
on the "55" is a bit faded though. Contact me privately if interested.
(jhaldeman@xxxxxxxx)
Thanks, and let me know if you have any questions along the way.
Cheers,
Josh
a whole bunch of VINs currently.
To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx
For more info on the list, tech articles, cars for sale see www.dmcnews.com
To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/dmcnews/
<*> To unsubscribe from this group, send an email to:
dmcnews-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN