[DML] Re: Car Jacks

["content22207" <brobertson@xxxxxxxxxxxx>]

Rear is easier than front, IMHO. I place the stands where lower
support arms join the frame. Are even molded protrusions that fit
cradles on the stands quite nicely. Only limitation is bit of a
squeeze between them if you're working in the bellhousing area.

When jacking the front, be sure to lift from the big frame, not
crumple extension. Place your stands there too.

It's interesting to note that on jack stands, the backwards
trapezoidal shape of our undercarriages (wider in the front than the
back) is really emphasized.

Bill Robertson
#5939

>--- In dmcnews@xxxxxxxxxxxxxxx, "dmcfixer2003" <randybell@xxxx> wrote:
> I want to raise my Delorean up and set it on Jack Stands so that I 
> can work under it. The front area, doesn't seem to be a problem, it's 
> the rear area that I'm having trouble finding a support location that 
> will work.




To address comments privately to the moderating team, please address:
moderators@xxxxxxxxxxx

For more info on the list, tech articles, cars for sale see www.dmcnews.com

To search the archives or view files, log in at http://groups.yahoo.com/group/dmcnews 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
     http://groups.yahoo.com/group/dmcnews/

<*> To unsubscribe from this group, send an email to:
     dmcnews-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
     http://docs.yahoo.com/info/terms/