[DML] Digest Number 50

[<dmcnews@xxxxxxxxxxx>]

Before posting messages or replies, see the posting policy rules at:
www.dmcnews.com/Admin/rules.html

To address comments privately to the moderating team, please address:
moderator@xxxxxxxxxxx
------------------------------------------------------------------------

There are 3 messages in this issue.

Topics in this digest:

      1. Re: Coil
           From: "DMC Joe" <dmcjoe@xxxxxxx>
      2. Re: door hinge raising
           From: "DMC Joe" <dmcjoe@xxxxxxx>
      3. Re: Engine compartment cover paint
           From: "DMC Joe" <dmcjoe@xxxxxxx>


________________________________________________________________________
________________________________________________________________________

Message: 1
   Date: Mon, 15 May 2000 00:14:28 -0400
   From: "DMC Joe" <dmcjoe@xxxxxxx>
Subject: Re: Coil

White/yellow connects to terminal #15.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxxxxx>
Web Site: <www.deloreanservices.com>
.
  
----- Original Message ----- 
From: Mike Bell <mbell1954@xxxxxxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Saturday, May 13, 2000 9:20 PM
Subject: [DML] Coil


> Can anyone tell me the color of the wire leading to terminal #15 on 
> the coil?  Thanks!




________________________________________________________________________
________________________________________________________________________

Message: 2
   Date: Mon, 15 May 2000 00:48:05 -0400
   From: "DMC Joe" <dmcjoe@xxxxxxx>
Subject: Re: door hinge raising

The front door hinge shims are part #105453, I believe that we, as well as
the other DeLorean part suppliers stock these items.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxxxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: <Delorean17@xxxxxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, May 14, 2000 11:50 AM
Subject: [DML] door hinge raising


> Hello,
>     My Jul 81 DeLorean had a large dent in the door so I bought a
perfect
> used one for it that came off off an 82 or 83 De Lorean.  I dont have
the
> T-panel on my car right now because the door is too close to the
fiberglass
> roof.  The top of the new door hits the fiberglass roof panel very hard
and
> makes a nasty noise when the door goes up.  There is no way I can put
the
> T-panel back on because the door would smash it when it went up.
>     I moved the four bolts connecting the doors to the hinges down and
that
> is still not even close to high enough.  The stainless actually bows in
when
> its up so I leave it closed now.  The manual says I am going to have to
add
> shims under the hinge mount.  Looks like the torsion bar has to come out
just
> after I got it in:(  does anyone know what DeLorean supplier has these
shims?
>
>
> Thanks
> Dave
> #2496




________________________________________________________________________
________________________________________________________________________

Message: 3
   Date: Mon, 15 May 2000 00:47:31 -0400
   From: "DMC Joe" <dmcjoe@xxxxxxx>
Subject: Re: Engine compartment cover paint

Dave,

Krylon semi-flat black spray is the only paint that should be used on the
engine cover. Follow the directions carefully for a professional looking
job.
I have seen paint that claims that it looks like stainless steel and it
still looks like silver paint.

"We're here to help you"
DMC Joe / De Lorean Services / <dmcjoe@xxxxxxx>
Web Site: <www.deloreanservices.com>
.

----- Original Message -----
From: <Delorean17@xxxxxxx>
To: <dmcnews@xxxxxxxxxxx>
Sent: Sunday, May 14, 2000 10:46 AM
Subject: [DML] Engine compartment cover paint


> Hello List,
>     I am finishing up the exterior of my 81 DMC and doing a few last
things
> before it gets painted.  The bottom of my engine compartment cover is
very
> faded and the screen retainer brackets are rusty.  What color do I paint
the
> cover and screen brackets? Is it flat black?  how should I prepare it
before
> I paint it?
>
>     what color are the screens supposed to be?  Myne are painted black
but
I
> am considering painting them a stainless steel color.  I remember seeing
a
> paint color called "stainless steel"  does anyone know who makes it?
>
> Thanks
>
> Dave,
> #2496-can't come to dmc2000:(




________________________________________________________________________
________________________________________________________________________

<<attachment: winmail.dat>>