RE: [DMCForum] A DELOREAN QUESTION
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] A DELOREAN QUESTION



You guys are just perverts! :)  I resemble that allegation. :P

Greg

PS - Mike, I did have the same experience dealing with my nuts.



-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Jon Heese
Sent: Wednesday, October 04, 2006 9:46 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] A DELOREAN QUESTION

I'm with Jack on this one.

That first paragraph was just downright painful...

Regards,
Jon Heese

timnagin wrote:
> I think my nuts are steel.  I had to twist all of my nuts off until they
> popped.  Some of them I had to cut.
> 
> That sounds just like my car.  One unique thing I found on mine was the
> stainless mounts on the back of each poontoon looked to have been worked
by
> a hammer to shape around where the top and bottom half of the underbody
> meet.  
> 
> I assumed all of this was because mine is an early car or it was altered
at
> some point.  What you mentioned seems to show mine was original.
> 
> Greg
> 
> 
> -----Original Message-----
> From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
> Of mike clemens
> Sent: Wednesday, October 04, 2006 9:02 PM
> To: dmcforum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] A DELOREAN QUESTION
> 
> Hi there group,
> 
> I'm in the midst of a rebuild of Josh Porter's car,
> Beastie Boy, and I have a simple question.  Has anyone
> ever gone into the rear pontoons to remove the bolts
> that hold the stainless steel bracket to the closing
> panel, the fender, and the black mud guard (for the
> lack of a better word).  Josh's car came from NY and
> the bracket was stainless, the bolts were stainless,
> the washers were stainless, but the nuts were plain
> old steel.  They were actually so corroded that I had
> to cut them off.  You haven't had any fun unless you
> got a Dremel tool inside the pontoon and tried to cut
> off a bolt!!! :-O  Yea, I know, all the ML types out
> there have skinney little arms, but, gee whiz,
> shouldn't the nuts on the bolts have been stainless
> too??
> 
> Am I mistaken, or did the PO do a modification that
> just plain sucks??  Any thoughts would be greatly
> appreciated.
> 
> Mike   TPS   1630



 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/DMCForum/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:DMCForum-digest@xxxxxxxxxxxxxxx 
    mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive