[DMCForum] A DELOREAN QUESTION
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] A DELOREAN QUESTION



Hi there group,

I'm in the midst of a rebuild of Josh Porter's car,
Beastie Boy, and I have a simple question.  Has anyone
ever gone into the rear pontoons to remove the bolts
that hold the stainless steel bracket to the closing
panel, the fender, and the black mud guard (for the
lack of a better word).  Josh's car came from NY and
the bracket was stainless, the bolts were stainless,
the washers were stainless, but the nuts were plain
old steel.  They were actually so corroded that I had
to cut them off.  You haven't had any fun unless you
got a Dremel tool inside the pontoon and tried to cut
off a bolt!!! :-O  Yea, I know, all the ML types out
there have skinney little arms, but, gee whiz,
shouldn't the nuts on the bolts have been stainless
too??

Am I mistaken, or did the PO do a modification that
just plain sucks??  Any thoughts would be greatly
appreciated.

Mike   TPS   1630

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/DMCForum/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/DMCForum/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:DMCForum-digest@xxxxxxxxxxxxxxx 
    mailto:DMCForum-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    DMCForum-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive