[DMCForum] Cold start Valve
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Cold start Valve

Hey everyone,
I am starting to have a cold start problem. Never had it before but 
all of a sudden It takes me a Long time to start (Sometimes as much as 
15min) When it starts it has no problems at all (Unless I leave it a 
long time). I'm Thinking it is the cold start valve but how do I test 
it to make sure? I'm not very mechanically inclined so if this is 
something I need to take to a Mechanic, please let me know! I Had 
talked to Rob Grady a while back about it and he said to loosen the 
Hex screws and I should see a spray of gas and if I don't then it is 
the Valve. I assumed I could fine those screws but I'm still looking 
for them...Is their somewhere on line that shows me how to test this? 
Thanks for your time.... 

Rick Barranco
Vin 3268

Yahoo! Groups Links

<*> To visit your group on the web, go to:

<*> To unsubscribe from this group, send an email to:

<*> Your use of Yahoo! Groups is subject to:

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive