RE: [DMCForum] Re: Re: Torsion bar adjustment
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Re: Re: Torsion bar adjustment



Nope, DMCH has the pistons that dampen at the end of the travel.
And DPNW has pistons that adjust to the outside temps.

Shannon Y
16506


-----------------------

From: "timnagin" <timnagin@...>
Date: Thu Oct 13, 2005  12:42 pm
Subject: RE: [DMCForum] Re: Re: Torsion bar adjustment

Rob Grady, maybe?

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Ryan Wright
Sent: Thursday, October 13, 2005 12:32 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: Re: [DMCForum] Re: Re: Torsion bar adjustment

Wow - thanks to everyone for your input.

This is going to be an interesting balancing act, then - trying to
adjust the bars just right so my launchers work but the doors don't
bounce too much at the top.

Doesn't anyone make a "dampening" lift strut that dramatically slows
down the opening at the last 1-2 inches of travel? The doors could
then swing open at whatever speed, but wouldn't hit and bounce at the
top.

-Ryan


           
__________________________________
Yahoo! Music Unlimited
Access over 1 million songs. Try it free.
http://music.yahoo.com/unlimited/


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive