RE: [DMCForum] Re: Newdelorean.com? or is it new Delorean.com
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] Re: Newdelorean.com? or is it new Delorean.com



It is a bad idea to cut any coil springs, or heat them so they can be
distorted.

Greg


-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On Behalf
Of Josh Porter
Sent: Sunday, October 02, 2005 4:42 PM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: [DMCForum] Re: Newdelorean.com? or is it new Delorean.com

Ok so I wasn't seeing things. I saved up engough money to buy the kit
for $700 but it's not worth $949 to me. Looks like I have two options
one, cut the springs and do it old school or have the original specs.
I'll probably stay with the latter because i cut the springs on my S-10
and felt every peeble on the road.

Josh

--- In DMCForum@xxxxxxxxxxxxxxx, Ryan Wright <ryanpwright@xxxx> wrote:
> Yeah, they were less than $700 when I bought mine earlier this year.
> Those ASP programmers must be expensive... ;-)
>
> -Ryan
>
> On 10/1/05, Josh Porter <joshp1986@xxxx> wrote:
> > Is it me or did the performance sorings and schocks go up? I thought
> > they were $700 not $949.
> >
> > Josh



SPONSORED LINKS
Dmc Dml Dmc fz10
Dmc fz1s Delorean part Dml forte


YAHOO! GROUPS LINKS






Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive