RE: [DMCForum] claw style spring compressor
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] claw style spring compressor



How about this... 10 fat guys to compress it and Suzanne Summers to hold
the spring betwixt her thighs.

-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On
Behalf Of Dave Stragand
Sent: Wednesday, June 22, 2005 11:59 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] claw style spring compressor

I think you'd need several fat guys - around 3000 pounds, or 10 FGU (Fat
Guy Units; 1 FGU = 300 pounds).



That would still be unsafe; you may have one of the ten fat guys fall on
you while you are operating the jack.  Ten fat guys in a lot for one
fender... or even the whole car.



________________________________

From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On
Behalf Of Travis Goodwin
Sent: Wednesday, June 22, 2005 11:50 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] claw style spring compressor





What if you jacked it up and had a fat guy sit on the fender? That might
work.

-----Original Message-----
From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On
Behalf Of Dave Stragand
Sent: Wednesday, June 22, 2005 11:48 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] claw style spring compressor

You couldn't compress the spring enough with a jack - you'd simply lift
the car off of the ground, unless you chained the frame to the floor.
In any event, it would likely be incredibly dangerous.  A compressed
spring can have more stored energy than a grenade.  I wouldn't rely on
zip ties to keep it from going ballistic.



-Dave



________________________________

From: DMCForum@xxxxxxxxxxxxxxx [mailto:DMCForum@xxxxxxxxxxxxxxx] On
Behalf Of Travis Goodwin
Sent: Wednesday, June 22, 2005 9:38 AM
To: DMCForum@xxxxxxxxxxxxxxx
Subject: RE: [DMCForum] claw style spring compressor



*      I don't remember who recommended this but it sounded like a
great idea.
      Use a jack and compress the spring. Then, take some big zip ties
and
      wrap them around the spring. I think they would need to be
pretty beefy
      zip ties. You should then be able to remove the spring while it
is
      completely compressed. Then when you reinstall it, just jack the
wheel
      back up, reattach and cut the ties..



[Non-text portions of this message have been removed]




Yahoo! Groups Links









________________________________

Yahoo! Groups Links

*      To visit your group on the web, go to:
      http://groups.yahoo.com/group/DMCForum/
       
*      To unsubscribe from this group, send an email to:
      DMCForum-unsubscribe@xxxxxxxxxxxxxxx
<mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
       
*      Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service <http://docs.yahoo.com/info/terms/> .



[Non-text portions of this message have been removed]




Yahoo! Groups Links








Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated