Re: [DMCForum] Brake Rotor question

[Johnny Sawyer <johnny.sawyer@xxxxxxxxx>]

Ryan, I totally agree with you.  My front rotors were horribly grooved
so I took them to a local machine shop to get them turned and trued. 
Cost me a whole $25 and my brakes are 100% better.

Erik, your brakes will probably never smooth out just my using them. 
All you will do is possibly ruin your new pads (if you installed new
ones).

Johnny
5518

On 6/15/05, Ryan Wright <ryanpwright@xxxxxxxxx> wrote:
> I'm not an expert on rotors, but I've done my fair share of brake
> jobs. My opinion: You should have had them turned. Sandblasting leaves
> little pits all over the place.
> 
> As for what to do now, well, I would take them off and have them
> turned. But that's just me.
> 
> -Ryan
> 
> On 6/15/05, DMC Erik <dmcerik@xxxxxxxxx> wrote:
> > While doing the restore I sent an entire set of rotors (front and back) to the sand blaster with all my other parts needing to be sand blasted.  The rotors were good, just really dirty and had a glaze on them.  I didn't get them resurfaced before I put them on thinking that eventually the pads will smooth the rotors out.  While driving you can definately hear the rotors giving off a harsh sound.  The sound goes away when I brake.  How long do you think it will be before the rotors smooth out?
> >
> > Erik

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.