Re: [DMCForum] Measuring the flywheel surface?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Measuring the flywheel surface?



Most calipers have a small rod that comes out of the
back.  You can use the rod to measure the step between
the surfaces.


--- Ryan Wright <ryanpwright@xxxxxxxxx> wrote:

> Group -
>
> What tool do I need, and how do I use it, to measure
> the surface
> difference on the flywheel between the outer ring
> and the inner
> (clutch disk) ring? I need to find out whether the
> flywheel is OK or
> not.
>
> I'd assumed a caliper would do this, but it's not
> going to give me an
> accurate difference due to the back of the flywheel
> also being
> stepped. Besides, the measurement "teeth" on my
> caliper aren't long
> enough to reach that far into the flywheel. I did
> measure the
> thickness of the flywheel on the outer ring at
> 0.746, but now I need
> to know how much higher the clutch disk surface is.
>
> I looked all over last night for a proper tool,
> trying to explain what
> I wanted to do to various tool salesmen, and nobody
> knew what I was
> talking about. :)
>
> -Ryan
>
>
> ------------------------ Yahoo! Groups Sponsor
> --------------------~-->
> What would our lives be like without music, dance,
> and theater?
> Donate or volunteer in the arts today at Network for
> Good!
>
http://us.click.yahoo.com/2xaSZB/SOnJAA/Y3ZIAA/HliolB/TM
>
--------------------------------------------------------------------~->
>
>

> Yahoo! Groups Links
>
>
>     DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>

>
>
>


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated