[DMCForum] Re: Repair holes in cooling pipe?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Repair holes in cooling pipe?



Sweet, they are a bit cheaper on the NOS aren't they?  I had no idea.

Matt
#1604


--- In DMCForum@xxxxxxxxxxxxxxx, Chris Almy <chris.almy@xxxx> wrote:
> If you are looking for cheaper replacements, DPNW sells most of them
used.
> I don't know what shape they are in, but I'm sure Toby will let you
know if
> you ask. Their web site is here:
> http://www.delorean-parts.com/
>
> Even the NOS stock they have is about 10% less then most other vendors
> (assuming they have it).
>
> Chris
> VIN 4099
>
> At 12:15 AM 6/11/2005 +0000, you wrote:
> >I pulled out some of the radiator coolant piping today.  I removed all
> >of the aluminum tubing from the water pump to about where the fuel
> >accumulator is.  Some of the tubing is actually pitted in some areas
> >to the point where there's pinholes in it!  These areas were mainly at
> >the sections where the rubber joining hose ended.  That is:
> >
> >==aluminum=====|\\rubber\\|=====aluminum===
> >
> >Right where the |'s are, is where the pitting was the worst.
> >Is there any way to repair this?  I looked and saw the price of those
> >tubes is at least $30 each.  Some cost more.
> >
> >thanks,
> >
> >Matt
> >#1604
>
>
> [Non-text portions of this message have been removed]





Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated