[DMCForum] Repair holes in cooling pipe?

["Matt Spittle" <mds328@xxxxxxx>]

I pulled out some of the radiator coolant piping today.  I removed all
of the aluminum tubing from the water pump to about where the fuel
accumulator is.  Some of the tubing is actually pitted in some areas
to the point where there's pinholes in it!  These areas were mainly at
the sections where the rubber joining hose ended.  That is:

==aluminum=====|\\rubber\\|=====aluminum===

Right where the |'s are, is where the pitting was the worst.
Is there any way to repair this?  I looked and saw the price of those
tubes is at least $30 each.  Some cost more.  

thanks,

Matt
#1604

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.