[DMCForum] Re: Installing a Non-Zilla remote lock system.

["mydelorean" <mike@xxxxxxxxxxxxxx>]

--- In DMCForum@xxxxxxxxxxxxxxx, Andrew <aos+yahoo@xxxx> wrote:
> On Sat, 7 May 2005, mydelorean wrote:
> 
> > How hard is it to install an off the shelf generic remote lock 
system
> > on a D?
> 
> It's very easy assuming your keyless system provides ground triggers, 
> which I believe they all do.  All you need to do is connect the lock 
and 
> unlock triggers to the brown/slate and brown/pink wires going to the 
lock 
> module (not necessarily respectively--I don't remember which is 
which).
> 
> -andrew


Hi Andrew

The remote unit works properly (responds to the hand-remote etc) - it's 
looks like the problem is how it's connected to the D's lock system.

The trigger lines are wired to the Pink/Red and Pink/Slate lines - the 
older owner said he never could get it to work.  Should they be on the 
brown/slate and brown/pink lines instead?

Mike

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.