Re: [DMCForum] Going keyless (push-button start) - Ryan...

[Andrei Cular <acular@xxxxxxxxxxxxxxx>]

Thats the 3-rotor...  If you have Jim's email you can ask him about the 
button, but I believe it was just a switch that he had laying around 
that worked.

Ryan get your self a wiring diagram and a book on basic automotive 
electrical.  Hooking up a start button in place of the key is a very 
simple operation, but if you have zero experience and no clue when it 
comes to automotive electrical systems you will get your self in to 
trouble really quick.

Andrei

timnagin wrote:

>Ryan,
>
>Was this the link you were looking for?  Scroll down to the second from the
>last picture.
>
>http://www.eliseusa.com/rotary.htm
>
>Greg
>
>
>
>-----Original Message-----
>
>Yes, it's me again.
>
>I recall reading a post many months ago about someone who replaced his
>ignition key with a push-button start. I specifically recall reading
>that the button fit perfectly in that hole. My questions,
>
>1. Anyone know who this was?
>2. Where'd the button come from?
>3. Do you supply power to the starter directly through the button, or
>is a relay used (and if so, any special type, or just a standard 12
>volt sealed automotive relay)?
>
>Thank you,
>
>-Ryan
>
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>
>
>
>  
>

Yahoo! Groups Sponsor

Get unlimited calls to

U.S./Canada

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.