Re: [DMCForum] Re: PRV Dwell Angle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: PRV Dwell Angle



No - I was replying to the question of whether the output can be scoped
- nothing to do with dwell angle - what is that anyway? suspect it's an
american term

Martin

cruznmd wrote:

> The manual definitely says dwell cannot be adjusted-
> I may have mis-read what value cannot be detected by an O-scope.
>
>
> --- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski - DMUK
> <martin@xxxx> wrote:
>  > Been there, done it, The output is very low current but a scope
> will
>  > have no problems with it - but the signal itself is very dirty.
>  >
>  > Martin
>  >
>  > content22207 wrote:
>  >
>  > > If PRV "pulse coil" is anything like a standard hall effect
> sensor, I
>  > > see no reason why you couldn't attach an oscilloscope. Are you
> sure
>  > > the manual doesn't state that dwell angle can't be ADJUSTED?
>  > >
>  > > An analog volt meter can measure voltage through the sensor even
> with
>  > > wave forms (yet another example of older technology triumphing
> over
>  > > its successor).
>  > >
>  > > Bill Robertson
>  > > #5939
>  > >
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> <http://us.ard.yahoo.com/SIG=129157p4r/M=295196.4901138.6071305.3001176/D=groups/S=1705126215:HM/EXP=1091809651/A=2128215/R=0/SIG=10se96mf6/*http://companion.yahoo.com>
>
>
> ------------------------------------------------------------------------
> Yahoo! Groups Links
>
>     * To visit your group on the web, go to:
>       http://groups.yahoo.com/group/DMCForum/
>       
>     * To unsubscribe from this group, send an email to:
>       DMCForum-unsubscribe@xxxxxxxxxxxxxxx
>       <mailto:DMCForum-unsubscribe@xxxxxxxxxxxxxxx?subject=Unsubscribe>
>       
>     * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>
> .



Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated