Re: [DMCForum] Re: PRV Dwell Angle

[Martin Gutkowski - DMUK <martin@xxxxxxxxxxxxxx>]

Been there, done it, The output is very low current but a scope will 
have no problems with it - but the signal itself is very dirty.

Martin

content22207 wrote:

> If PRV "pulse coil" is anything like a standard hall effect sensor, I
> see no reason why you couldn't attach an oscilloscope. Are you sure
> the manual doesn't state that dwell angle can't be ADJUSTED?
> 
> An analog volt meter can measure voltage through the sensor even with
> wave forms (yet another example of older technology triumphing over
> its successor).
> 
> Bill Robertson
> #5939
>

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.