[DMCForum] Re: Dave Stragand's HP
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Dave Stragand's HP



HP *CAN NOT* exist without torque. It's an _expression_ of torque
(measured at a certain number of RPMs). Try to define it independently
and you'll see. "HP vs Torque" is a red herring.

I have an 11:1 460 (factory, not built) in storage. I might let you
have it for the Vixen if you promise not to defang it with some silly
aftermarket FI kit. Will produce power for you well into the 3000 RPM
range, but you'll rarely find need to go up there (because of all its
TORQUE).

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "Dave Stragand" <dave.stragand@xxxx>
wrote:
> Oh no!  The hp vs torque argument again!!!  =)

> If the block is built up strong enough, with about 7:1 compression
and 14
> psi of boost through free-flowing manifolds and heads, well, there
should be
> oodles of oomph from 2000 up.

> -Dave
>
> -----Original Message-----
> From: content22207 [mailto:brobertson@xxxx]
> Sent: Thursday, July 22, 2004 11:38 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: Dave Stragand's HP
>
>
> Don't fall into the Horsepower trap. 200 HP in the mid 2000 RPM range
> outperforms 300 HP in the upper 3000's or lower 4000's.
>
> PRV is too small to produce those numbers (NA) without really winding
> up, but they're pretty standard for bone stock late model big blocks.
>
> We've had this discussion before...
>
> Bill Robertson
> #5939
>
>
>
> [Non-text portions of this message have been removed]


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN 


Copyright ProjectVixen.com. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive

This site contains affiliate links for which we may be compensated