Re: [DMCForum] Re: Newly acquired DeLoreans

[Andrei Cular <andreic@xxxxxxxxxxxxxxxxxx>]

LOA is determined by measuring the distance along a level horizontal 
line between the FP and AP of a hull or deck.  On conventional 
mono-hulls this dimension is taken along the CL which is perpendicular 
to the beam.

FP = Forward most point of the hull or deck
AP = Aft most point of the hull or deck
CL = Centerline of the hull or deck

Is that a sufficient boating definition for you?

Capt. Andrei
Licensed in accordance with CFR 10.205(i)

timnagin wrote:

>LOA = Length Over All... doesn't anyone do any boating?  So, does any know
>the height of the rear mounted power antenna?
>
>Greg
>
>
>-----Original Message-----
>From: ryanpwright [mailto:yahoo1@xxxxxxxxxxxxxx]
>Sent: Monday, July 19, 2004 6:58 PM
>To: DMCForum@xxxxxxxxxxxxxxx
>Subject: [DMCForum] Re: Newly acquired DeLoreans
>
>
>I'm not familiar with this acronym: LOA.
>
>-Ryan
>
>--- In DMCForum@xxxxxxxxxxxxxxx, "timnagin" <timnagin@xxxx> wrote:
>  
>
>>What is the LOA of the original?   The ones my vendor has have black
>>    
>>
>masts,
>  
>
>>and have been discontinued by Harada and is about 31" extended.
>>
>>Greg
>>    
>>
>
>
>
>
> 
>Yahoo! Groups Links
>
>
>
> 
>
>  
>


[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.