[DMCForum] My A/C woes

["cruznmd" <racuti1@xxxxxxxxxxxx>]

After letting Walt go to town on my A/C system, I'm all charged up 
and holding pressure.

Too bad the wiring was hacked. 

I was missing the diodes in the relay compartment. They are wired 
head-to-head. One diode keeps the otterstat from tripping the A/C 
compressor clutch when the A/C isn't on and the other diode keeps 
current from flowing backwards up the line through the otterstat and 
into your volt meter (which would blow it out).

I have traced the engine fan and A/C wiring from stem to stern (Lo 
prsr switch, mode switch, relay compartment, clutch wiring and 
otterstat) and it is now perfectly correct. I have new diodes. 

Here's the problem:

When using John Hervey's fan fix 2x2, the fans come on as they 
should, be it with the A/C mode switch or the otterstat but the 
relays stick and when you power down the entire car the fans keep 
running unless you thump the fanfix box to unstick the relays (I even 
removed the box from the car and the relays read closed on my meter)

If I remove the box and use a fan relay and jumpers in the fan fail 
socket, the relay whines and won't close. The fans don't run.

Any ideas?

Rich A.
#5335

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.