[DMCForum] Re: Maiden Voyage Of The RMS DeLorean

["content22207" <brobertson@xxxxxxxxxxxx>]

I'm still burning a factory radiator. If it comes out, an all metal
one is going back in its place (guaranteed soap free).

This soap like substance looks like off white caviar. It has little
granules or BB's, glued together with white goo that looks like... The
BB's are soft enough to crush between your fingers. Leave a slick
residue. Don't create any bubbles however.

When I cleaned out the internal water pipe discovered cold water had
absolutely no effect whatsoever. If anything is going to break this
stuff loose, it's going to have to be hot. That may be why my radiator
isn't cleaning itself -- is totally cold to the touch (at the same
time coolant is boiling in the rear. Too bad I can't circulate that
280 degree water!).

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, "James Wallen" <james.a.wallen@xxxx>
wrote:
> Bill, this might sound labor intensive, but what if you fill a 
> bathtub with HOT HOT water, and maybe a few pans of boiled water for 
> good measure and a small pump.  That way you could totally submerge 
> the radiator or most of it at a time anyways and go at it that way?  
> I'm not sure the exact dimensions of a Delorean radiator, or how 
> difficult it is to remove, but that's my $.02.
> 
> -James

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.