[DMCForum] Re: Cold Start Injector At Full Throttle
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: Cold Start Injector At Full Throttle



I thought Winged1 was burning a carbureted GM repower of some ilk...

See DML Message #29112.

Already tried this. Temporarily wired the cold start injector to my
dormant full throttle switch (no Lambda on a Renault Z7). Engine
actually bogged down with it spraying. Was obviously the K Jetronic
equivalent of over carbureting.

Bill Robertson
#5939

>--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <martin@xxxx> wrote:
> No, it would be far too rich, and not guarantee an even dispersal
> between all six cylinders. Is your WOT switch not working?
>
> Martin
>
> tmpintnl@xxxx wrote:
> > Hi guys - I lurk, therefore I am.  I read Rich's article
> > on "hotwiring" the cold start injector, and have a question to the
> > general audience.  Would this work for temporary enrichment of the
> > fuel/air mixture at wide open throttle?  Winged1 goes a bit lean at
> > WOT, and I tried to richen things up a bit using the mixture screw.
> > The bad thing is that I am too rich at idle then, and the Lambda
> > system gets grumpy.  It would seem that a little extra shot
> > (manually applied) would be a good thing for performance and to
> > prevent that dreaded detonation that can happen at WOT in a slightly
> > lean condition.  What thinkest thou?
> >
> > Toby Peterson
> >


Yahoo! Groups Sponsor
ADVERTISEMENT
click here


Yahoo! Groups Links



Home Back to the Home of PROJECT VIXEN


Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive