Re: [DMCForum] Re: Time for my fuel system fix
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [DMCForum] Re: Time for my fuel system fix

I keep seeing misinformation here

The mode switch parts can be lubed with vasoline, silicone or my preferance lithium grease
The longer it keeps from drying out the better.

I don't know where you got the info that vasoline eats the rubber.  I make the part and there is NO truth to that rumor.
These parts are fine with any of the above mentioned .

Oils tend to dry out to fast and make the switch stick and can plug the holes but will not harm the material.  It is a gasoline resistant material.  Thie bigest problemis  ove lubing them and plugging the vacuum holes.

The same with the fuel boots
I read part of a post from before and the boots do NOT shrink in gas.  They expand by up to 5% just like the originals and less that other remanufactured boots.

It is just as good as the others and I will guarentee it for 7 years.  No other boot will warrent that and I have one that I will gurarentee for life but due to scrap rate and material costs it is $150 we had 12 made and a I am using mine in my cars. There are about 5 left.

Please be careful on the advice given most of you know what parts I make if you have a question ask


I am only trying to clear up this post


Yahoo! Groups Sponsor
click here

Yahoo! Groups Links

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive