[DMCForum] Re: UNF Adapters

["cruznmd" <racuti1@xxxxxxxxxxxx>]

Martin/Bill,

What does UNF mean?

Rich


--- In DMCForum@xxxxxxxxxxxxxxx, "content22207" <brobertson@xxxx> 
wrote:
> Bottom of the page:
> http://www.mcmaster.com/asp/DisplCtlgPage.asp?
reqtyp=catalog&CtlgPgNbr=35&sesnextrep=405283125304946&CtlgEdition=110
&k1=&t1=PN&ScreenWidth=800&McMMainWidth=588
> 
> Custom length hydraulic hose with NPT and SAE fittings is easy to 
come
> by. With one of these jewels on the slave cylinder you could be in
> business for $25 or so (eliminate the union above the transmission).
> 
> Bill Robertson
> #5939
> 
> >--- In DMCForum@xxxxxxxxxxxxxxx, Martin Gutkowski <webmaster@xxxx> 
wrote:
> > The fitting at the rear end of the clutch line is some sort of 
UNF 
> > thread. The place that makes our lines warned me that they had to 
do 
> > some hunting to find some and have a limited supply. Only 40 ends
> left :-)
> > 
> > content22207 wrote:
> > 
> > >I guarantee threads on the master cylinder are American 1/4" 
SAE. Not
> > >sure what size the union above the transmission is (is not 5/16" 
SAE),
> > >but the nuts do take a 5/8" wrench better than anything metric. 
> > >

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.