RE: [DMCForum] RE: parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [DMCForum] RE: parts

Martin, Don't be unimpressed. If you will notice that the connectors we use
are all new. We also have sources for all of them.FV 90 Degree & fuel line
return from distributor 90 degree swep hose also..

  -----Original Message-----
  From: Martin Gutkowski [mailto:webmaster@xxxxxxxxxxxxxx]
  Sent: Thursday, March 04, 2004 6:22 PM
  To: DMCForum@xxxxxxxxxxxxxxx
  Subject: Re: [DMCForum] RE: parts

  FWIW ours comprise ALL the hoses. Even the one you have to cut off the
  frequency valve. We also sell the accumulator and fuel pump hoses with
  the correct ends, already crimped. All banjos are brand new - I was
  unimpressed to see that JH relies on recycled ones. It took a while but
  we did find a source of the 90 degree swept banjo on the return line. We
  also put the correct end on that hose where it joins the hard line to
  avoid using the factory adapter.


  Walter Coe wrote:

  >The best pair I saw was for sale by Don Steger at the
  >Memphis show.  I think they cost around $350, and this
  >didn't include lines from the fuel filter to CPR, anything
  >to do with the frequency valve, and I don't think it
  >included the return line.

        Yahoo! Groups Sponsor

  Yahoo! Groups Links

    a.. To visit your group on the web, go to:

    b.. To unsubscribe from this group, send an email to:

    c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

[Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

Yahoo! Groups Links

Home Back to the Home of PROJECT VIXEN

Copyright 2006  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive