Re: [DMCForum] An actual tech question!

["Walter Coe" <Whalt@xxxxxxx>]

It's your call on whether or not to do anything with the
wheel bearings when you do the rotors.  These bearings
aren't meant to be repacked or anything.  You are supposed
to just wait for them to go bad & then replace them.

I have heard stories about people repacking them with good
success.  I've also heard of repacking new ones that looked
too dry.  These bearings are a press fit into the hub, so it
isn't likely that you can remove one without destroying it.
But you could try repacking it without removing it.

The bearing can be ordered cheap from PepBoys.  Let me know
if you want the #.

Walt

Yahoo! Groups Sponsor

ADVERTISEMENT

---

Yahoo! Groups Links

• To visit your group on the web, go to:
  http://groups.yahoo.com/group/DMCForum/
   
• To unsubscribe from this group, send an email to:
  DMCForum-unsubscribe@xxxxxxxxxxxxxxx
   
• Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.