RE: [DMCForum] FelPro valve cover gasket number

["Travis Goodwin" <tgoodwin@xxxxxxxxxxxx>]

I'll take a look at the Fel-Pro kit I have and get the number off of
there.
I ended up getting everything for $75 on Ebay. 

I haven't had any leaks on my covers. The only leak I had was on the plate
on the RS head that allows the cam journal to poke out when removing it
from
the timing chain sprocket. A retorque and all it well with the world.

> -----Original Message-----
> From: content22207 [mailto:brobertson@xxxxxxxxxxxx]
> Sent: Monday, September 22, 2003 4:33 PM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] FelPro valve cover gasket number
> 
> FelPro number on box is VS26090. Stock item at Autozone. Comes up in
> computer under Volvo PRV of some ilk (probably 1985 760). They can
> pull it just by box number.
> 
> Think you'll like 'em.
> 
> Bill Robertson
> #5939
> 
> >--- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> > My kit was for a Volvo 760 GLE, 1983. Which ones are you looking at?
> >
> > > -----Original Message-----
> > > From: content22207 [mailto:brobertson@xxxx]
> > > Sent: Monday, September 22, 2003 3:30 PM
> > > To: DMCForum@xxxxxxxxxxxxxxx
> > > Subject: [DMCForum] FelPro valve cover gasket specs
> > >
> > > Checked out a set of FelPro #VS26090 at lunch. Indeed metal core
with
> > > rubber facings. Not thickest in the world -- about .045" -- but
> > > imminently better than a piece of paper.
> > >
> > > Need metal core because people have tendency to over torque solid
> rubber.
> > >
> > > I have significant mismatch between timing chain cover and cylinder
> > > head so seated gasket in a bed of silicone. If doing same remember
you
> > > need two torqings: one gentle just to flatten silicone, and one hard
> > > after it's set up.
> > >
> > > Bill Robertson
> > > #5939
> > >
> > >
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> 
> 
> 
> To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=194081.3897168.5135684.1261774/D=egroupweb/S=170512
6215:HM/A=1732163/R=0/SIG=11n0nglqg/*http://www.ediets.com/start.cfm?code=
30510&media=zone> click here	
 
<http://us.adserver.yahoo.com/l?M=194081.3897168.5135684.1261774/D=egroupm
ail/S=:HM/A=1732163/rand=209071316> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>