Hi Rich A friend discovered the cross reference this side of the pond and these bearings are quite easy to come by and not all that expensive. They come in three parts with the inner rings retained by the tightness of the balls. My simple test is to take the hub off and see if the bearing falls apart. If it does, it's time for a new one, if not, just get the grease gun on it, or wait till it goes bad - like I said, not too expensive. Martin Travis Goodwin wrote: >I too am interested in this subject since I plan to replace my front rotors. > > > >>-----Original Message----- >>From: cruznmd [mailto:racuti1@xxxxxxxxxxxx] >>Sent: Tuesday, August 19, 2003 1:57 PM >>To: DMCForum@xxxxxxxxxxxxxxx >>Subject: [DMCForum] Next topic: Wheel bearings >> >>The front wheel bearings don't look like what I was expecting. >>(I was browsing the DMCH website). These look like sealed bearings or >>something. >> >>Can they be re-packed or not? My car has low mileage but the grease >>is probably old and broken down and I'd like to re-pack them. Or do I >>have to replace them outright? >> >>What say you? >> >>Rich >> >> >> Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3707890.4968055.1261774/D=egroupweb/S=170512 6215:HM/A=1595053/R=0/SIG=124gf29oe/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3707890&yhad=1595053> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3707890.4968055.1261774/D=egroupm ail/S=:HM/A=1595053/rand=787550585> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN