RE: [DMCForum] Re: Impact Wrench

["Travis Goodwin" <tgoodwin@xxxxxxxxxxxx>]

Good. I haven't checked it yet but that's the type I have. 

I was originally going to replace it but based on the condition of the
gasket on the right side I am going to stick with the left side, at least
for a while. I want to get the car back together and see if it is dead or
not. If not, I will replace the other one.

> -----Original Message-----
> From: cruznmd [mailto:racuti1@xxxxxxxxxxxx]
> Sent: Monday, August 11, 2003 9:39 AM
> To: DMCForum@xxxxxxxxxxxxxxx
> Subject: [DMCForum] Re: Impact Wrench
> 
> I have a standard drill type.
> 
> Are you only replacing one head gasket? I know it's a pain but you
> should do the other one "while you're in there". :)
> 
> --- In DMCForum@xxxxxxxxxxxxxxx, Travis Goodwin <tgoodwin@xxxx> wrote:
> > Hey Rich, what type of impact wrench did you buy? Was it one of the
> flat 90
> > degree jobs or more along the standard type (like a regular drill)?
> >
> > As for the rest of the job, I'm taking my time. I'm drilling and
> retapping
> > all of the exhaust system, replacing all coolant hoses, and
> replacing all
> > vacuum hoses. The head should go back on this evening and then the
> timing
> > cover can be replaced.
> 
> 
> 
> To unsubscribe from this group, send an email to:
> DMCForum-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/



Yahoo! Groups Sponsor	 

ADVERTISEMENT
 
<http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170512
6215:HM/A=1693353/R=0/SIG=11t71ok4g/*http://www.netflix.com/Default?mqso=6
0178294&partid=3170658> click here	
 
<http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm
ail/S=:HM/A=1693353/rand=295754834> 	

To unsubscribe from this group, send an email to:
DMCForum-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
<http://docs.yahoo.com/info/terms/> .

<<attachment: winmail.dat>>