My bad, i was looking at the idle cold readings. I still would like those resistance values though. thanx jordan 11613 --- jordan rubin <nuttenschleuder@xxxxxxxxx> wrote: > Hello all: > > According to the tech bible > > Oil pressure, warm engine, new oil/filter > > 900 rpm min. 14.2 psi > 3000 rpm 57.0 psi > > The pictures on the howto show something drasticaly > different. So where looking at one or more of three > things. > > 1. Oil sending unit (new) not calibrated for > gauge > 2. Gauge out of calibration > 3. Calibrated but oil pressure is excessive. > > Standard oil gauges readings are relative to changes > in the cables resistance between ground. So if I > ground the sire to the gauge, it drops to zero, take > it off it flys to the top. > > The question is... > > Does anyone know what the resistance value is in > ohms at the different intervals on the gauge. I > believe the gauge is in incriments on 20psi. > > if (X)ohms takes the gauge to 40psi and (2X)ohms to > 80, i can see not only if my gauge is correct, but > the > sending unit too. > > thanx > > jordan 11613 > > __________________________________ > Do you Yahoo!? > Yahoo! SiteBuilder - Free, easy-to-use web site > design software > http://sitebuilder.yahoo.com > __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free, easy-to-use web site design software http://sitebuilder.yahoo.com Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=245454.3656312.4921743.1261774/D=egroupweb/S=170512 6215:HM/A=1457554/R=0/SIG=11c6fnta2/*http://ipunda.com/clk/beibunmaisuiyui wabei> <http://us.adserver.yahoo.com/l?M=245454.3656312.4921743.1261774/D=egroupm ail/S=:HM/A=1457554/rand=381634518> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN