erik, here is a paste from DML......this will take you 5 minutes.... Mike C Maybe it's time to run this tip again since there are many new subscribers. If you are tired of your A/C lights being on all the time and the heat damage this can do to your radio, here's a simple fix. Remove the access panel behind the passenger seat exposing the relays. Facing the rear you have a bottom row and a top row. Count three from the left on the top row and remove it. Save it ( it's the same as some of the others and can be used as a spare). Get two 1/4" spade connectors and a 2 1/2" piece of good wire. Put a spade connector on each end of the wire. One end goes in the bottom slot ( closest to you ) and the other goes in the slot to the right. Before you put it all back together start the car ( no illumination ) and then turn on your lights ( illumination ). When you have assured yourself that everything works, button it back up. There is a whole electrical diagram that will tell you why this works, but it doesn't really matter. The usual disclaimer applies. Yahoo! Groups Sponsor ADVERTISEMENT <http://rd.yahoo.com/M=244522.3313099.4604523.1261774/D=egroupweb/S=170512 6215:HM/A=1595054/R=0/SIG=124km4b11/*http://ashnin.com/clk/muryutaitakenat togyo?YH=3313099&yhad=1595054> Click Here! <http://us.adserver.yahoo.com/l?M=244522.3313099.4604523.1261774/D=egroupm ail/S=:HM/A=1595054/rand=543546318> To unsubscribe from this group, send an email to: DMCForum-unsubscribe@xxxxxxxxxxxxxxx Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service <http://docs.yahoo.com/info/terms/> .
<<attachment: winmail.dat>>
Back to the Home of PROJECT VIXEN