[DMCForum] Re: how to make a DeLorean sign...?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[DMCForum] Re: how to make a DeLorean sign...?

Hey John,
I think I have a creative idea:
Why not take a sheet of Glass (or Plexiglass) and mask off
a "negative" of what you want to see. That is to say, mask off
everything but the lettering and design you want to have.

Then bead blast or sand blast (lightly) the surface. When you remove
the masking only what was not masked will be "etched".  If you do
this on glass, you can then edge-light the glass...I guarantee it
would look awesome!

Just an idea - no doubt it would be unique. I get into creative
stuff like that.

Dunedin, FL

--- In DMCForum@xxxxxxxxxxxxxxx, "John Dore" <dmcjohn@xxxx> wrote:
> Hey Lads,
> I'm looking for suggestions on how to make a home-made DeLorean
> dealership sign to hang on one of the walls in our house!
> I'd like it to be back lit, and be approx 4 to 5 feet wide.
> I could cut the DMC logo out of aluminium with a jig saw, then put
> some plexiglass sheet behind this and a flourescent bulb behind
> plexiglass. This would illuminate the DMC letters fine. But, I'd
> really like to have the DeLorean Motor Company written under the
> logo, and could not cut this out with a jig saw.
> Basically I'm wondering if anyone has the capability to print a
> sticker that would have the DMC logo and DeLorean Motor Company
> writing clear/see through on a black background? Then if this was
> applied to the plexiglass directly, it would light up nicely.
> Any help/suggestions much appreciated.
> Happy New Year!!
> John

Yahoo! Groups Sponsor
click here

Yahoo! Groups Links

Home Back to the Home of PROJECT VIXEN

Copyright 2006 ProjectVixen.com.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
DMCForum Mailing List Archive  DMCNews Mailing List Archive  DMC-UK Mailing List Archive