[doc] Re: Horror Of Getting Stuck In Gear At A Junction (Cutch Cylinder
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[doc] Re: Horror Of Getting Stuck In Gear At A Junction (Cutch Cylinder ??)
- From: "blackaddertoo" <blackaddertoo@xxxxxxxxxxx>
- Date: Mon, 06 Mar 2006 02:43:14 -0000
hi
is the system all original, lsave, master and pipe?.
my original master had stuck down, (but if this happened would
disengage the clutch)
has is had any trouble getting gears? ie has the original line been
ballooning?.
i would probably replace or rebuild the master to start as a rebuild
kit is only a few quid (and easy to get to).
my slave had also gone, i fitted a rebuild kit but new ones are
cheap.
just a pig to to.
i did mine from under the car hugging the gearbox, difficult but not
impossible.
easiest would be to remove the intake manifold, but a lot of work to
do that.
worth doing though if you need to do the valley, waterpump etc.
Regards
Steve
--- In doc-uk@xxxxxxxxxxxxxxx, "Simon Prince" <skyhopper2000@...>
wrote:
>
> Can anyone advise...
>
> Driving back to my house suddenly the clutch pedal was as loose as
> anything with no operation what so ever with the car stuck in 3rd,
> managed to 'slam' the gear stick into neutral and then slam it
into
> 1st at the traffic lights (the engine didn't really like that at
> all), then an up hill nightmare - I couldn't get it out of 1st and
> had to force a stall at a junction (otherwise I would have
totalled
> it !!). Drove another mile in 1st again and just got it on my
drive
> OK - AND THEN THE CLUTCH PEDAL WORKED FINE AGAIN, **** !!!
>
> What's the problem ...
>
> The Clutch Cylinder ??
> If that's the case which one ?? (Master or Slave Cylinder ?)
>
>
> Regards
>
> Simon
> VIN.5789
> DOC.399
> www.skyhopper.freeserve.co.uk/delorean
>
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/doc-uk/
<*> To unsubscribe from this group, send an email to:
doc-uk-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN