RE: [doc] Oh for an O'ring !
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [doc] Oh for an O'ring !
- From: "Kevins Work" <kevin.milliken@xxxx>
- Date: Wed, 12 Mar 2003 10:53:05 -0000
Hi Andy
You could try Burton Performance, in Ilford they have a good selection.
Kevin
-----Original Message-----
From: Andy Snell [mailto:andy@xxxx]
Sent: 12 March 2003 9:55 AM
To: 'doc-uk@xxxxxxxxxxxxxxx'
Subject: RE: [doc] Oh for an O'ring !
Thanks Claire - I had managed to get some round ones that nearly fit but I
found that they popped out of position as I bolted the air assembly in
place. I guess the flat ones never did that!
I'll let you know if I do find a source of originals.
All the best
Andy
> ----------
> From: Claire Usher
> Reply To: doc-uk@xxxxxxxxxxxxxxx
> Sent: Wednesday, March 12, 2003 9:33 AM
> To: doc-uk@xxxxxxxxxxxxxxx
> Subject: Re: [doc] Oh for an O'ring !
>
> Hi Andy,
>
> if I remember rightly these are the O rings that Martin and Dave needed
> when we were rebuilding 'Flopsy's engine....I hunted high and low for
them
> but had to end up getting rounded O-rings instead of the original flat
> ones that came out of the engine.
>
> I got them in one of our local motor factors in the end, I just took in
an
> oily cloth with the old ones in (to get them sized). The only one I
> couldnt get was the 'doughty seal' - forgotten where that one goes -
> Martin, can you remember??
>
> Hope this helps,
>
> Claire
> #2292 'Flopsy'
> www.ourdelorean.co.uk
>
> ----- Original Message -----
> From: Andy Snell
> To: 'doc-uk@xxxxxxxxxxxxxxx'
> Sent: Wednesday, March 12, 2003 8:43 AM
> Subject: [doc] Oh for an O'ring !
>
>
> Hi there,
>
> This is the first time I've used the Delorean mailing, so a big hello
from
> me in Bath!
>
> I am wondering if anyone out there knows of where I can get hold of the
6
> original rubber O rings that sit in the ports between the air assembly
> unit
> and the cylinder head blocks. Also do you know where I can get hold of
the
> fuel distribution rubber or nylon pipe sets?
>
> Many thanks,
>
> Andy
>
>
> [Non-text portions of this message have been removed]
>
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed
> public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
Yahoo! Groups Sponsor
ADVERTISEMENT
DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Back to the Home of PROJECT VIXEN