Re: [doc] Is this right???
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] Is this right???
- From: "Chris" <chris@xxxx>
- Date: Sun, 13 Oct 2002 23:07:23 +0100
No the picture is wrong the nut should be on top
regards
Chris S
----- Original Message -----
From: "Paul Salsbury" <paul.salsbury@xxxx>
To: <DMCForum@xxxxxxxxxxxxxxx>; <dmcnews@xxxxxxxxxxxxxxx>;
<doc-uk@xxxxxxxxxxxxxxx>
Sent: Sunday, October 13, 2002 10:51 PM
Subject: [doc] Is this right???
> Since seeing this picture:-
>
>
http://www.delorean-dmc12.co.uk/restoration/pages/layout/suspension/after/su
> spension/Dscf0012.jpg
>
> I have been concerned that I have put my track rod ends on up side down.
>
> I have them with the nut on the top, In the manual they are on the top,
> however I have found other photos of D's with them this way up.
>
> Now, when the lowered springs are put on the front the steering is alot
> lighter as the angle between the rack and track rod is reduced. If the
track
> rod end were put on this way up it would be even less.....
>
> Any comments??
>
> Cheers
> Paul
> #6463
>
> http://homepage.ntlworld.com/paul.salsbury/
>
>
>
>
>
> DOC UK Website: www.delorean.co.uk
> Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
> ** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Back to the Home of PROJECT VIXEN