RE: [doc] *** Over-heat protector kit components (from UK shops) ***
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [doc] *** Over-heat protector kit components (from UK shops) ***
- From: "Chris Parnham" <chrisparnham@xxxx>
- Date: Fri, 5 Jul 2002 09:22:14 +0100
James,
What does the "Radiator hose " look like ? is it black?
Chris p
-----Original Message-----
From: jamesrguk [mailto:James_rg@xxxx]
Sent: 04 July 2002 17:48
To: doc-uk@xxxxxxxxxxxxxxx
Subject: [doc] *** Over-heat protector kit components (from UK shops)
***
Hi all,
If you are thinking about buying and installing the 'Over-heat
Protector Kit', which self bleeds the water pump, I am pleased to
inform you that I have found all of the necessary components in a
Hosequip shop and a motor store in Colchester.
Required Parts:
1.25m of thin radiator hose
4 x Stainless Jubilee Clips (Hose Clips)
1 x Metal T-Piece
1 x Extended nipple for the bleeder hole
All of this stuff cost me a total of just under £15.00 and I have
fitted it today (see photos section on DOC E-Groups)
These kits are $25 from the States and you have to pay postage and
wait however long for them to turn up.
If anyone would like the bits without having to buy them from the
States and pay postage etc. then please e-mail me and I will make up
some sets and take them to SCS. I will do them for £15 per set (which
covers the cost for me to drive around Colchester getting the bits
etc..).
Regards
James RG
James_rg@xxxx
DOC UK Website: www.delorean.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed
public and may be printed in the club magazine **
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN