Re: [doc] door struts

[Martin Gutkowski <webmaster@xxxx>]

Hi Mike

One of the reasons I went for Rob's struts was the "brake" in the last inch of travel. My doors open with alacrity, but do not
bounce - the strut slows them down beautifully.

Cheers

Martin

Senatorpack@xxxx wrote:

> There are two different version here in the USA. PJ Grady sells a door lift
> piston (strut) that is identical to the OEM strut. The piston is set to
> pressure to coincide with the torsion bar.
> I purchased a set of lift pistons from DeLorean One in California. The
> pistons are slightly overfilled with pressure to give it a little extra kick.
> However one caveat...do not let the doors "fly open" as the force can rip the
> mounting stud off of the door opening
> Best Wishes,
> Michael