Fw: [DML] mirror switch completed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Fw: [DML] mirror switch completed
- From: "Chris Parnham" <chrisparnham@xxxx>
- Date: Wed, 9 May 2001 09:10:55 +0100
Another little gem!
Chris P
----- Original Message -----
From: "Hank Eskin" <heskin@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Wednesday, May 09, 2001 1:14 AM
Subject: Re: [DML] mirror switch completed
>
> Hello All,
>
> I'm no longer obsessed with the mirror switch. I figured it all out,
and
> while I wasn't able to repair my existing switch, I was able to match up a
> switch from a 1995 Saab 900 (part# 4466405). I picked up two of these
> switches for $8 on ebay, not knowing at all if they would work, but I
> figured it can't be THAT difficult. It took some time to figure out the
> Delorean wiring (thanks DMCJoe and Jan), as well as tracking down the
> schematic and wiring diagram for the Saab switch (thanks to some Saab
> enthusiasts out there). With one small exception, the Saab wiring exactly
> matches up to the existing wiring harness.
>
> The best part is that the Saab switch fits perfectly into the shell of the
> old switch (with a little plastic removal, that is), and once installed,
> looks almost like a stock switch if you didn't know any better.
>
> I put up some quick photos and wiring chart here:
> http://www.eskin.net/saabswitch.html
>
> -Hank #1619
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Back to the Home of PROJECT VIXEN