Fw: [DML] old used parts for sale

["Chris Parnham" <chrisparnham@xxxx>]

----- Original Message -----
From: <delorean502@xxxx>
To: <dmcnews@xxxxxxxxxxxxxxx>
Sent: Friday, March 30, 2001 4:27 AM
Subject: [DML] old used parts for sale


> Hi,
> I have some parts that NEED TO GO! Most of the parts are damaged and
> may only be good for testing or for art work....your call.
> 1 front fascia (area behind the grill is cracked, the rest is good)
> 2 rear bumpers (foam bumper that goes behind the fascia)
> 1 damaged drivers door. Comes with all of the glass and wiring
> harness (someone broke into the door with a crowbar...damn robbers)
> Engine parts (all are in good/great shape...air venturie, plenum, air
> intake)
> Damaged flat hood (fiberglass broke and stainless bent a little...if
> this doesn't sell i might use the stainless to fabricate interior
> parts ie: shift pattern)
> Gas tank cover (minor surface rust)
> 1 whole wiring harness ( i took this out of my parts car...finally.
> All intact, except a couple plugs for the front side lights,
> otherwise it is all there and doesn't look damaged)
>
> Also, whats left of my parts car is for sale. Sadly there isn't much
> left that I can use, but someone out there might need something. The
> rear section of the fiberglass is usable. It has the rear window. 4
> brake calipers (needs rebuilding of coares) Rotors, some coolant
> lines, rear trailing arms (suprisingly in good shape), and varius
> brackets and such. It doesn't come with wheels. Like I said, it is
> down to scrap, but someone out there might need some of these parts.
> I will let this go for real cheap. I can tow it on my flat bed
> trailer up to 100 miles of my house. Make an offer and I'm sure I
> will accept it....not free though :)
>
> Erik
> 04512
>
> These parts need to go. If you are interested, make an offer and I'm
> sure I will accept it.
>
>
>
>
> Before posting messages or replies, see the posting policy rules at:
> www.dmcnews.com/Admin/rules.html
>
> To address comments privately to the moderating team, please address:
> moderator@xxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>