Re: [doc] missing o-ring and clip helpppppppppppppppp!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [doc] missing o-ring and clip helpppppppppppppppp!
- From: "essexdick" <tny1964@xxxxxxx>
- Date: Tue, 20 Jun 2006 21:10:36 -0000
thanks Mike i love you, il even treat it to a new fuel guage whil
im at it. To be honest i didnt think you could get the parts.......
will miracles never cease, thanks for your help cheers tony
--- In doc-uk@xxxxxxxxxxxxxxx, "Mike Bosworth" <mike.bosworth@...>
wrote:
>
> Tony
>
> In case you are feeling flush these are the 2 bits, DMCH has them
in
> stock.... Might be a better solution for you in the long run :)
>
>
> Item 7 102294 CUP, SEAL 1 $1.78
> Item 8 102293 SEAL,O RING 1 $2.66
>
> Regards
>
> Mike
> #2001 HEC6T
> 403
>
>
> --- In doc-uk@xxxxxxxxxxxxxxx, "essexdick" <tny1964@> wrote:
> >
> > cheers Nick, i have the o-ring, but its the retaining ring iv
> > lost for it,if i had a piece of alloy tube tigged with a piece of
> > pipe the right size, would this obstruct anything as im a bit fed
> up
> > trying to get the pipe back in everytime the timing needs
> setting?
> > cheers tony ps i think its been out a while ie since Lotus
> >
> > --- In doc-uk@xxxxxxxxxxxxxxx, Nick Tomlinson
> > <nickandkathryntomlinson@> wrote:
> > >
> > > buy a new one?
> > > it might have gone under the inlet manifold, oooh
> > > if it is still you could try a long reach magnetic pickup
> around
> > there and hope it clicks.
> > >
> > > NickT.
> > >
> > > p.s. if you are desperate then good old silicon sealant
> globbed
> > round the end of the brass tube could be a temporary solution.
> > >
> > > essexdick <tny1964@> wrote:
> > > Hi everyone, im in a little bit of bother, the pipe
> from
> > the idle
> > > motor which goes just in front of the ditributor into the main
> > body,
> > > well the o-ring and clip have vanished. I have looked
> everywhere,
> > in
> > > the valley of death, chassis,every orifice underneath the car
as
> > well.
> > > Does anyone have any suggestions of what i can do,to sort this
> > problem
> > > out.. yours in hope Tony TT
> > >
> > >
> > >
> > >
> > >
> > >
> > > ---------------------------------
> > > Try the all-new Yahoo! Mail . "The New Version is radically
> easier
> > to use" ? The Wall Street Journal
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/HliolB/TM
--------------------------------------------------------------------~->
DOC UK Website: www.deloreans.co.uk
Unsubscribe: doc-uk-unsubscribe@xxxxxxxxxxxxxxx
** Unless otherwise stated, all messages posted to the group are assumed public and may be printed in the club magazine **
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/doc-uk/
<*> To unsubscribe from this group, send an email to:
doc-uk-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of PROJECT VIXEN